How to Program a Python Keyless Remote

1.

Enter your vehicle with each Python remote that you are programming and your ignition key in hand. Close all of the doors and the trunk behind you.

2.

Insert your key into the ignition and turn the key to the "On" position.

3.

Press and hold the lock button on your remote within five seconds, and release after holding for one second.

4.

Turn the key back to the "Off" position.

5.

Repeat 2 to 4 three more times, each time within five seconds of the last cycle. You will end with the key in the "On" position for the fourth cycle instead of the "Off" position.

6.

Wait for the doors to cycle the locks to indicate that you have entered the programming sequence and press the lock button on the Python remote that you are programming.

7.

Press the lock button on any additional remotes within five seconds of the last remote, waiting for the locks to cycle after each remote to indicate successful programming.

8.

Turn the ignition "Off" to end the programming sequence.

Python is the manufacturer of a popular car alarm system available in the United States, and offers a keyless entry alarm remote for automobiles. These remotes can be programmed and reprogrammed in just minutes. With only your ignition key, you can program your Python remote with no previous experience and have your system ready for use immediately.